Learn › Course › Lesson 3

EQ: make room, don’t decorate

Lesson 3 of 87 min read

Cut what is in the way so every source has its own space.

Cut before you boost

Most EQ problems are too much of something, not too little. Taking away what is in the way usually sounds cleaner and more natural than boosting what you want more of.

Start with a high-pass filter: it removes rumble below the useful range of a source. A vocal mic does not need the thump of the stage or the air conditioning.

Know where the trouble lives

When many sources pile up, the low mids (roughly 200 to 500 Hz) turn the mix muddy. Harshness tends to live in the upper mids (roughly 2 to 5 kHz), where the ear is most sensitive. These are starting points, not rules: sweep and listen.

If two sources fight in the same range, give each its own space: a little less of that range on the one that matters less.

Judge it in the mix

Solo a channel to find a problem, then judge the fix with everything playing. A guitar that sounds thin on its own often sits perfectly in the band.

Check what stuck

Answer all three to pass this lesson.

1A vocal mic picks up stage rumble. What do you reach for first?
2The band sounds muddy together. Where do you usually look?
3Where should you judge an EQ change?