Learn › Monitoring and outputs › Feed a stream encoder

Feed a stream encoder

Sharing4 stepsRouting › Outputs

DINE does not stream or encode. It plays the Broadcast feed out of a pair of outputs, always stereo on 1–2, and your encoder or streaming app takes that in. Up to three more feeds send the mix, or one group, somewhere else.

1Open Outputs

Open Routing › Outputs in the sidebar, or View › Outputs…, or the output device pill on the toolbar › Set up outputs….

2Point Broadcast at the encoder

Under Broadcast, pick the device your encoder listens to: the hardware output wired to it, or a network audio device. If the encoder runs on the same Mac, you need a loopback or virtual audio device; DINE does not include one.

3Add a feed

Press Add a feed. For each one choose the Source (Main mix, one group such as Speech for a lobby, or My headphones) and the Destination pair.

Main mix→Broadcast · Out 1–2
Speech→Feed 2 · Out 5–6LOBBY
Main mix→Feed 3 · Out 7–8MONO

4Set its level

Level is for that output only and never changes the mix. Turn on MONO for a fill speaker or a phone line, or MUTE to silence it. Press × on a feed to stop sending it.

Did this help?